| | |
|
|
|
|
Cut a 6mm thick piece of sintra 1" wide by 1and 5/8 long. Viewed: 555 times.
|
Cut out two notches to make room for the zip ties. Viewed: 458 times.
|
Take the wheels and battery pack off the Sumovore. Viewed: 488 times.
|
| | |
| | |
|
|
|
|
Place the Sintra piece between the motors like so. Viewed: 481 times.
|
Two #4 screws that are 1" long fit well into the sides. You may want to drill the mounting holes in the motors a bit larger so that the screws don't thread into the motor. Viewed: 526 times.
|
Drill the screws in. Viewed: 471 times.
|
| | |
| | |
|
|
|
|
The battery pack will need to have another pair of holes drilled. Viewed: 412 times.
|
The holes are drilled 1/8th" slightly behind center and off to either side of the battery so that the screw heads will not interfere with the batteries. Viewed: 450 times.
|
The back side of the battery pack with the holes drilled. Viewed: 422 times.
|
| | |
| | |
|
|
|
|
Mounting the battery pack to the sintra with 1/4" screws. Viewed: 485 times.
|
Don't forget to re-attach the battery pack. Viewed: 494 times.
|
Add the wheels and the batteries and your done! Viewed: 707 times.
|
| | |
